Osmotech 1070 is an anti-scalant with a high stabilising capacity, developed for membrane systems where deposits, caused by high hardness or suspended solids, are likely to occur. It is intended for industrial and trade use.

 

AVAILABLE IN 20L DRUMS.

Osmotech 1070 – Antiscalant for Membrane Systems

$407.00

Out of stock

Description

Osmotech 1070 – Description

Osmotech 1070 is an anti-scalant with a high stabilising capacity, developed for membrane systems where deposits, caused by high hardness or suspended solids, are likely to occur. It is a clear to slightly turbid, yellow-brownish liquid blended product based on phosphoric acids.

Specifications

  • Appearance: clear to slightly turbid, yellow-brownish liquid
  • pH (1% DI-water): <2.5
  • Density (20 °C): 1.32 ± 0.03 g/cm³
  • Sensitivity to Freezing: Approximately – 12°C
  • Solubility in Water: totally miscible in all proportions
  • Total P content (Calculated as PO4³-): 48 ± 2 %
  • Total P content (Calculated as P): 15.6 ± 0.6%
  • Effect on Environment: The product is non-volatile and non-flammable
  • Dosage: Dosage depends on many factors, e.g. recovery rate, hardness, content of suspended solids, etc.
  • Certified to NSF/ANSI 60

Mode of Action

Osmotech 1070 prevents the formation of crystals from water hardnees by blocking crystal growth. Beyond the stabilisation limit an amorphous precipitate is obtained which is dispersible and does not form a hard scale on the membrane surface, so that it can be flushed out with the brine.

Application

  • Osmotech 1070 can either be added undiluted or, if preferred, as a solution in water. The product should be added by an automatic dosing system regulated by the quantity of the feed water flow, particularly where the quantity of the feed flow shows large variations.
  • All parts of the dosing system, which come  in contact with the product must be made of acid resistant material. Synthetic materials (PE, PVC) are preferable to metallic components because of the complexing ability of the phosphoric acids contained in the product.
  • The product should be added at or before a point of high mixing intensity in the system. The dosage may be adapted to the capacity of the dosing system by diluting of the product.
  • Osmotech 1070 is intended for industrial and trade use.

 

Additional information

Weight 25 kg
Dimensions 55 x 17 x 14