Used for water applications, the MP-8000 Multi-Purpose Ozone Generator is designed with heavy duty jobs in mind. At 8000 mg/hour, the MP-8000 is versatile enough to complete household jobs, light industrial and commercial applications.
The multi-purpose unit was made to tackle a variety of applications including water ozonation, sanitation and treatment. These units aim to provide the purest water by removing undesirable tastes, chemicals, odours and colours.
- Purifying water for drinking
- Wash vegetables/fruits to remove chemicals
- spas
- bathtubs
- fountains
Previous industries that have purchased this generator include:
- water bottling plants
- irrigation farms
- fodders
- agricultural applications
- fresh markets
- restaurants
- doctors offices
The Generator can also maintain your fruits and vegetables at their freshest state by eliminating herbicides and pesticides. Washing your produce in ozonated water will maintain a fresh flavour and vibrant colouring that will greatly extend the preservation period, some by as long as two weeks.
How it Works
- Plug your power cord into the back of the unit and the wall socket.
- Remove the bulkhead nut on O³ out port.
- Then insert the bulkhead onto the tubing.
- Screw the nut back onto the O³ out port.
- Attach the diffuser stone of your choosing to the opposite end of the tubing.
For Oxygen Air:
- Disconnect the small tubing from the O² in port.
- Connect the oxygen source to the O² in port with appropriate tubing.
- Adjust the flow rate of the oxygen source to a maximum of 3-6 L/minute or PSI 5.
For Ambient Air:
- Turn on both air compressor switch and the ozone switch, in that order.
- Keep in mind, the unit will NOT power up until the timer is set.
- Turn the power button on – it is located on the back of the unit by the power cord.
- Turn the ozone concentration knob to 100 percent or desired concentration for the given application.
Set the unit timer for the desired application duration.
Please note: Use a gas vent and an ozone destructor to ensure proper dissipation of ozone. To ensure proper ozonation of water, use ozone test strips.
Please Note: Operate with good ventilation. In case of exposure, immediately get to a well ventilated area. If inhaled, ozone can damage the lungs. Refer to SDS ozone.
Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.
- Ozone Output: 8 g/hour with Oxygen Source; 1600 mg/hour without Oxygen Source
- Oxygen Feed Gas Flow Rate: 2-4 LPM
- Energy Usage:145W
- Ozone Concentration: 0-45 gr/m3
Oxygen Concentration Flow Rate
8G 8.5KV/8KHZ
- Oxygen Flow Rate (L/M): 0.25, Ozone Output: 3198mg/h
- Oxygen Flow Rate (L/M): 0.5, Ozone Output: 3198mg/h
- Oxygen Flow Rate (L/M): 0.75, Ozone Output: 4504mg/h
- Oxygen Flow Rate (L/M): 1, Ozone Output: 5460mg/h
- Oxygen Flow Rate (L/M): 2, Ozone Output: 8580mg/h
- Oxygen Flow Rate (L/M): 3, Ozone Output: 9594mg/h
