Description

DI Resin Cartridge 4.5″ x 20″ 1.5 GPM

Deionising cartridges or DI Cartridges provide solutions for a variety of applications that need the removal of ionic contaminants. Cartridges with mixed bed resins provide better than 16 megohm-cm quality water for ultra pure needs.

Included is:

 One refillable 20″ x 4.5″ Big Blue Canister

3 kg  of DI resin (in canister)

Perfect for laboratories, reefkeeping and rinsing or plating operations

Deionising  cartridges provide solutions for a variety of applications that need the removal of ionic contaminants. Cartridges with mixed bed resins provide better than 16 megohm-cm quality water for ultra pure needs.

Features & Benefits

• Premium Tulsion  resins
• High Capacity Media
• Ideal for pharmaceutical, semi-conductor, medical, and industrial applications
• Oversized Body for Maximum Media Fill
• Fits Standard BB & FF Housings
• Body Materials FDA Approved
• Ideal Cartridge to Install Post-RO to Lower TDS
• Fits Most 4.5” x 20” Filter Housings

Specifications

• Total Capacity (Grains as CaCO3): 2,350 Grains or 40273 ppm CaCO3
• Estimated Gallons:
  • 200 PPM Feed – 643 litres
  • 5 PPM Feed – 25,471 litres
• TDS Reduction: 14 to 18 Meg Ohm
• Flow Rate:
  • Operating – 0.5 GPM
  • Maximum – 1.5 GPM
• Temperature Range – 40°F (5°C) to 90°F (32°C)
• Pressure Range – 20 PSI (1.4 bar) to 125 PSI (8.6 bar)
• Micron Rating:25 Micron
• Materials:
  • Cap – ABS
  • Body/Tube- ABS
  • Pad – PE
  • Gasket – EPDM

How to refill an empty DI Cartridge

• Unscrew the bottom cap from the DI cartridge and remove the foam ring.
• Pour in the DI resin and pack it down tightly as hard as you can. Tap on a counter to help settle the resin.
• At this point the resin should be tightly packed flush to the rim.
• Put the foam ring back inside the screw cap and screw the cap on.
• Place the newly filled cartridge into the RO canister and make sure the arrow on the side of the cartridge points up.