Water Softeners

Removal of scale-forming hardness minerals

PWT  Commercial Water Softeners use premium ion-exchange resin to remove calcium, magnesium, iron, and manganese ions from your commercial or industrial water supply. In the end, you can run your business more effectively using fewer detergents and cleaners, reducing the hard-water build-up inside pipes and machinery and saving equipment from unnecessary wear.

Metered Water Softeners (or Demand Water Softeners) are prompted to regenerate based on the amount of water that has passed through the unit. Like the timed softeners, these can be programmed to regenerate at a certain time of day. Instead of regenerating on a specific day as a timed softener does, the metered softener does not schedule a regeneration until the specified amount of water have passed through the softener. These units can save water by preventing unnecessary regenerations since it does not regenerate until the resin is near its capacity.

Tank dimensions do not include base. *Flow rates are a guide only – peak flow rates can be achieved for short periods. Peak flows based on 105kpa pressure loss through valve. Minimum inlet pressure 420 kpa. Maximum inlet pressure 600 kpa with no water hammer. For open discharge applications (e.g. tank filling), or during regeneration a switch kit &/or solenoid valve or NHWBP option will be required to provide back-pressure when the softener is regenerating. Refer to  sales@side8-testing.com  for information and pricing.

C&I SERIES

Clack Valves

THE PRINCIPAL SCALE-FORMING MINERALS, CALCIUM AND MAGNESIUM,   ACCUMULATE IN PIPING, HEAT EXCHANGERS, WATER HEATERS, BOILERS AND  STEAM EQUIPMENT RESULTING IN SIGNIFICANT INCREASES IN ENERGY  CONSUMPTION, HIGHER RUNNING COSTS AND MAINTENANCE 

FEATURES

• Single or multiple softener configurations
• Top-mount 5-cycle automatic softener valves. Side-mount option available on WTWS16 to WTWS48 systems
• Water meter, pressure differential or external signal regeneration initiation
• Single, alternating or twin metered controls. Sequential or parallel controls for multiple softeners
• Free-standing FRP fibreglass wrapped polyethylene resin tanks
• Heavy duty polyethylene brine tanks & lids
• Food grade industrial softener resin
• No Hard Water Bypass valve option to prevent unsoftened water to service during regeneration
• Motorised alternating valve option for  soft water regeneration

Tank dimensions do not include base. *Flow rates are a guide only – peak flow rates can be achieved for short periods only. Peak flows based on 105kpa pressure loss through valve. Minimum inlet pressure 420 kpa. Maximum inlet pressure 600 kpa with no water hammer. For open discharge applications (e.g. tank filling), or during regeneration a NHWBP option will be required to provide back-pressure when the softener is regenerating.