This ozone visual test kit from CHEMets contains all of the necessary tools to perform 30 tests for dissolved ozone: Refill, Low and High Range Comparators, Activator solution, 25 ml sample cup and instructions; all packaged together in a plastic case.

Ozone Visual Test Kit – CHEMets

$236.50

Available on backorder

Description

This ozone visual test kit from CHEMets contains all of the necessary tools to perform 30 tests for dissolved ozone: Refill, Low and High Range Comparators, Activator solution, 25 ml sample cup and instructions; all packaged together in a plastic case.

Detection Range:
0 – 0.6 ppm (mg/L) & 0.6 – 3.0 ppm (mg/L)

Shelf Life (when stored in the dark and at room temperature):

  • Visual colorimeter – Shelf life of 4 years
  • Colour comparators and accessory solution – Shelf life of 2 years

Applications:

  • Potable water
  • Pools & Spas
  • Food & Beverage industry
  • Pharmaceutical industry
  • NOT applicable for seawater

Method

The K-7404 CHEMets Visual Kit is a visual indicator kit for measuring ozone in water levels from 0-0.6 and 0.6-3.0ppm.  This device uses the DPD Method for testing. Using this method Potassium iodide is added to the sample before analysis.  The Ozone present reacts to the iodide to liberate iodine.  Then the iodine reacts with DPD (N, N-diethy-l-p-phenylenediamine) to form a pink colour.

1. Add 5 drops of Activator Solution to the empty sample cup. Fill the sample cup to the 25 mL mark with the sample to be tested being careful to minimise turbulence. 2. Immediately place the ampoule tip-first into the sample cup. Snap the tip and the ampoule will automatically fill.
Person using an Ozone Visual Test Kit in Australia
3. To mix the ampoule, tilt it from side to side, allowing the bubble to travel from end to end. 4. Dry the ampoule and wait 1 minute for colour development.
5. Place the ampoule into the centre of the round comparator and hold it toward a source of light, viewing from the bottom. Rotate the comparator until the colour below the ampoule shows the closest match. 6. For higher concentrations, use flat comparator. Place the ampoule between the colour standards, moving it along the comparator until you can determine the closest match.
Person checking chlorine measurements using an Ozone Visual Test Kit

 

Benefits of using an Ozone Visual Test Kit

An Ozone Visual Test Kit is a handy tool that is used to determine the presence of ozone gas in a particular area. Ozone gas is a naturally occurring molecule that is made up of three oxygen atoms. It is used in various industrial and commercial applications, including water treatment, air purification, and food processing. Ozone is a powerful oxidizing agent that can help eliminate harmful bacteria, viruses, and other contaminants. However, it can also be harmful to human health if it is present in high concentrations.

One of the key benefits of using an Ozone Visual Test Kit is that it allows you to quickly and easily determine the presence of ozone gas in a particular area. This can be particularly important in industrial and commercial settings where ozone is commonly used. By using a visual test kit, you can ensure that ozone levels are within safe limits and that workers are not exposed to harmful concentrations of the gas.

Another benefit of using an Ozone Visual Test Kit is that it is very easy to use. Most kits come with simple instructions that can be followed by anyone, regardless of their technical knowledge or experience. The test typically involves exposing a small test strip to the air in the area being tested and then comparing the color of the strip to a color chart. This allows you to quickly determine whether ozone is present and, if so, at what concentration.

In addition to being easy to use, an Ozone Visual Test Kit is also very affordable. Compared to other methods of testing for ozone, such as laboratory analysis or electronic sensors, a visual test kit is much less expensive. This makes it a great option for smaller businesses or individuals who need to monitor ozone levels but do not have the resources to invest in more expensive equipment.

Finally, an Ozone Visual Test Kit is a very versatile tool that can be used in a wide range of settings. It is commonly used in industrial and commercial applications, but it can also be used in residential settings to monitor ozone levels in the air. This can be particularly important for individuals with respiratory issues or other health concerns who may be sensitive to ozone.

In conclusion, an Ozone Visual Test Kit is a valuable tool that can help ensure safe levels of ozone gas in a variety of settings. It is easy to use, affordable, and versatile, making it a great option for anyone who needs to monitor ozone levels. Whether you are a business owner, a homeowner, or just someone who wants to ensure the air you breathe is safe, an Ozone Visual Test Kit is a great investment.

Additional information

Weight 0.75 kg
Dimensions 25 x 17 x 8