AQUAPURE Packaged Ozone Generators Commercial
The AquaPure series ozone generators are complete and fully integrated ozone systems that seamlessly combine all critical elements of ozone into sanitary, splash-resistant, stainless steel packages suitable for industrial applications.
- Size Guide
- Additional information
AQUA PURE Packaged Ozone Generators- Complete, integrated ozone solutions
The AquaPure packaged ozone generator system is designed to quickly integrate into an existing ozone injection system These systems offer a turn-key solutions, with reliability and performance you can trust. Optional Equipment can
be added to each of the AquaPure systems for easy customisation to fit your needs.
- 4 -30 grams/hour ozone production
- Generates high levels of ozone
- Easy and simple installation
- Automated system
- Produces ozone from integrated Oxygen Concentrator
- Central switch starts and stops system
- Optional stainless steel tank, pump, and piping
- Compact design
- Water flow from 1-30GPM
- Ready to use upon delivery
Aquapure leads the way
Compact and high ozone yield Ozone Generators with Oxygen Concentrator with flows up to 30 g/h and concentrations above 60 g/m³ of ozone.
Gas flow (adjustable)
Built in cooling fans
Size L x W x H (mm)
|OZ10OC3-MC||4.0-10.0 g/h||>55 mg/L
at 3.0 L/min
|0.5 – 3.0 L/min||> 90 %||24 h/day||2 x 80 CFM||Stainless steel||275 x 270 x 392||16.7Kg|
|OZ18OC5-LF||6.0-18.0 g/h||>58 mg/L
at 5.0 L/min
|1.0 – 5.0 L/min||> 90 %||24 h/day||1 x 80 CFM
2 x 40 CFM
|Stainless steel||381 x 350 x 560||45 Kg|
|OZ28OC8-LF||8.0-28.0 g/h||>58 mg/L
at 8.0 L/min
|1.5 – 8.0 L/min||> 90 %||24 h/day||1 x 80 CFM
3 x 40 CFM
|Stainless steel||381 x 350 x 560||47 Kg|
|Operating temperature||-10 deg C — +60 deg C||Storage temperature||-20 deg C — +70 deg C|
Ozone Approval for use in the Food Industry
Ozone has been given GRAS(Generally Recognized as Safe) approval by the USDA and the FDA for direct contact with food products, including all meat and poultry products. While good manufacturing procedures must be in place, no regulations exist on levels of ozone in food processing applications. The final rule from the FDA providing GRAS approval was given in 2001, the USDA followed with the final rule granting GRAS approval for ozone in 2002. Hazard Analysis and Critical Control Point (HACCP) plans can benefit by using Ozone Food Safety Solutions systems disinfection technology.
The USDA National Organic Program has also allowed Ozone as an Antimicrobial Food Additive and Food-Contact Surface Disinfectant.
Ozone (O3) is a powerful oxidizer and disinfectant. It is the most effective oxidiser and disinfectant which can be produced commercially at a reasonable cost. Ozone is a form of oxygen which contains in its molecule 3 atoms of oxygen. The oxygen molecule in the air only contains 2 atoms.
The literature has reported that ozone reacts thousands of times faster than chlorine and consequently disinfects very rapidly. EPA guidelines direct us toward disinfection guidelines with chlorine and ozone. For example, disinfecting with 1 ppm chlorine at a water temperature of 59°F and a pH value of 7 will require a retention time of 75 minutes. The disinfection efficiency achieved will be 99.9 percent.
Ozonating the same water with ozone and achieving a disinfection efficiency of 99.9 percent using the same temperature and pH and a concentration of 1 mg/l ozone will require a retention time of only 57 seconds. In this example, it applies to giardia in the sample water. Contrary to chlorine, which always leaves an oxidation or disinfection byproduct, ozone simply will revert back to oxygen. As a matter of fact, during the oxidation or disinfection process, only one oxygen atom is used for the chemical reaction.
Another significant benefit of ozone gas is that it is generated on-site and as needed. There is no chemical to store and no residual disinfection byproducts to monitor.
Disinfection is the destruction of pathogens in the water, particularly bacteria kill, inactivation of viruses, and removal of parasites. If disinfection is not properly performed, then distributing visibly clear water, which could be completely free of any traces of toxic-carcinogenic or mutagenic products, could be an unacceptable risk because it severely affects and threatens the health of the general population.
|Dimensions||5 × 5 × 10 cm|