ULP11-4040 RO Membrane Element 2400 GPD|Vontron

Worldclass RO ultra low pressure membrane 4″x 40″  for commercial applications and salinity levels up to 2000 ppm.

ULP11-4040 Reverse Osmosis Membrane Element 2400 GPD

$418.00

In stock

Description

ULP11-4040 RO Membrane Element 2400 GPD |Vontron

 

Vontron Low Pressure Reverse Osmosis Membrane, 2,800 gpd ULP11-4040

Vontron ULP11-4040 RO membrane is a ultra-low pressure polyamide compound membrane element.

This world class   ultra low pressure  membrane  delivers  high permeate flows and salt rejection  at lower raw water pressures, compared  to  regular low-pressure membrane elements.  Suitable for brackish and bore water , however higher silt density index may require additional treatment.  It operates under approximately 2 thirds of the operating pressure of regular low-pressure composite membrane, and achieves a salt rejection rate of up to 98.0%.  The lower energy requirement  decreases the  equipment  cost in particular pump rating and pressure rating of the membrane housing.

 This low pressure reverse osmosis membrane  is suitable for  water purification applications of  water sources with salt concentration lower than 2000 ppm, such as surface water, underground water, tap water and municipal water, etc.
ULP11-4040 membrane elements are ideally suited for commercial applications  such as pure water  boiler water feed , food processing, spot free rinse applications including window cleaning and pharmaceutical production.

 

Specification ULP11-4040

  • Stable Rejection Rate: 98.0%
  • Minimum Rejection Rate: 97.5%
  • Average Permeated Flow: 2,800 gpd (9.1 m3/d)
  • Active Membrane Area: 85 ft2
  • Size: 4″ x 40 “

Operating Conditions

  • Max.Working Pressure: 600 psi
  • Max.Feed water Flow: 16 gpm (3.6 m3/h)
  • Max. Feed water Temperature: 45C
  • Max. Feed water SDI: 5
  • Residual chlorine Concentration of Feed Water: <0.1ppm
  • pH Range of Feed water during Continuous Operation: 3~1
  •   pH Range of Feed water during Chemical Cleaning: 2~12
  •   Max. Pressure Drop of Single Membrane Element: 10psi( 68 kPa)

 

Commercial Applications

  • Drinking water for restaurants
  • Drinking water vending machines
  • Aquarium water treatment
  • Softened water for homes, hotels, commercial laundries and car wash.
  • Post-treatment of deionised water
  • Pure water for pharmaceuticals, laboratories and electronics
  • Hemodialysis
  • Oil/water separation
  • Spot free rinse – window and solar panel cleaning
  • Sterilisers and autoclaves ( additional Deionising stage may be required)

Other ULP Series Reverse Osmosis Membrane Specification

TYPICAL REJECTION CHARACTERISTICS OF R.O. MEMBRANES
Elements and the Percent R.O. Membranes will remove
Sodium
Sulfate
Calcium
Potassium
Nitrate
Iron
Zinc
Mercury
Selenium
Phosphate
Lead
Arsenic
Magnesium
Nickel
Fluoride
Manganese
Cadmium
Barium
Cyanide
Chloride
85 – 94%
96 – 98%
94 – 98%
85 – 95%
60 –75%
94 – 98%
95 – 98%
95 – 98%
94 – 96%
96 – 98%
95 – 98%
92 – 96%
94 – 98%
96 – 98%
85 – 92%
94 – 98%
95 – 98%
95 – 98%
84 – 92%
85 – 92%
% may vary based on membrane type water pressure, temperature & TDS

 

Additional information

Weight 3.5 kg
Dimensions 100 x 21 x 21